We are independent & ad-supported. We may earn a commission for purchases made through our links.
Advertiser Disclosure
Our website is an independent, advertising-supported platform. We provide our content free of charge to our readers, and to keep it that way, we rely on revenue generated through advertisements and affiliate partnerships. This means that when you click on certain links on our site and make a purchase, we may earn a commission. Learn more.
How We Make Money
We sustain our operations through affiliate commissions and advertising. If you click on an affiliate link and make a purchase, we may receive a commission from the merchant at no additional cost to you. We also display advertisements on our website, which help generate revenue to support our work and keep our content free for readers. Our editorial team operates independently of our advertising and affiliate partnerships to ensure that our content remains unbiased and focused on providing you with the best information and recommendations based on thorough research and honest evaluations. To remain transparent, we’ve provided a list of our current affiliate partners here.
Hardware

Our Promise to you

Founded in 2002, our company has been a trusted resource for readers seeking informative and engaging content. Our dedication to quality remains unwavering—and will never change. We follow a strict editorial policy, ensuring that our content is authored by highly qualified professionals and edited by subject matter experts. This guarantees that everything we publish is objective, accurate, and trustworthy.

Over the years, we've refined our approach to cover a wide range of topics, providing readers with reliable and practical advice to enhance their knowledge and skills. That's why millions of readers turn to us each year. Join us in celebrating the joy of learning, guided by standards you can trust.

What Is a TRIAC?

By G.W. Poulos
Updated: May 16, 2024
Views: 13,337
Share

A TRIAC is an electrical component that has two leads used to connect an alternating current (AC) and a third lead used to trigger the device. Unlike some other devices, such as transistors and diodes, a TRIAC can conduct current in either direction between its two conductive leads. The trigger portion of the device, called its gate, turns the device on or off to varying degrees. Using the gate in conjunction with the phase of an alternating current, a TRIAC can be set to allow only a portion of an AC signal to pass through it and often is used in devices such as dimmer switches and electrical motor speed controls.

The word TRIAC, created by merging triode with AC, was originally a trade name used by General Electric for its version of a silicon-based, gate-controlled, full-wave AC switch. Since its original release, however, the word has become the general name for all such devices. In proper terms, the devices are referred to as bidirectional or bilateral triode thyristors. Occasionally, the device is simply called a thyristor, which is convenient but not entirely accurate, as the device is essentially a configuration of two thyristors.

A thyristor is a specialized semiconductor device typically made of four layers of silicon fused together. The four individual layers of silicon are treated so that they possess the alternating electrical charges of positive-negative-positive-negative, or PNPN. Each end of the layers serves as a connector to access the thyristor. The positive end is the device’s anode and the negative end its cathode. A gate connection is also made to the positively charged layer sandwiched between the two negatively charged layers.

Under static conditions, the alternating layers of charge resist allowing an electrical current to flow through the thyristor. There is, however, a limit to the amount of voltage the device can resist. If the voltage applied to the device exceeds that limit, the device will succumb to an effect called an avalanche and begin to conduct the electrical current.

In order to control the thyristor, a negative voltage is applied to its gate. This alters the charge in the positive layer to a more negative inclination, which can trigger an avalanche. By varying the voltage at the gate, the avalanche point of the thyristor can be varied, allowing the device to conduct electrical current only at or above a predetermined voltage.

AC signals continuously alternate from full positive voltage toward zero voltage, then toward full negative voltage, back toward zero voltage, and then back toward full positive voltage again. This means that an AC signal is constantly changing its voltage level. As a result, by varying the gate voltage of a thyristor, the percentage of the AC voltage that can pass through the device can be varied and controlled.

Thyristors, however, can only conduct an electrical current in one direction, which will block half of the AC voltage in the same way a diode would. In order to use the full AC voltage, a TRIAC is constructed of two thyristors. By connecting the anode of one thyristor to the cathode of the other on one end, and the remaining cathode and anode on the other end, the two devices can conduct a single AC voltage in both directions. The two gates, also interconnected, allow one control signal at the gate to control an AC signal passing through the TRIAC. In this way, a TRIAC can provide any desired portion of an AC voltage to a device, such as a motor, and by varying the gate voltage, vary the speed of the motor.

Share
EasyTechJunkie is dedicated to providing accurate and trustworthy information. We carefully select reputable sources and employ a rigorous fact-checking process to maintain the highest standards. To learn more about our commitment to accuracy, read our editorial process.
Discussion Comments
Share
https://www.easytechjunkie.com/what-is-a-triac.htm
Copy this link
EasyTechJunkie, in your inbox

Our latest articles, guides, and more, delivered daily.

EasyTechJunkie, in your inbox

Our latest articles, guides, and more, delivered daily.