We are independent & ad-supported. We may earn a commission for purchases made through our links.
Advertiser Disclosure
Our website is an independent, advertising-supported platform. We provide our content free of charge to our readers, and to keep it that way, we rely on revenue generated through advertisements and affiliate partnerships. This means that when you click on certain links on our site and make a purchase, we may earn a commission. Learn more.
How We Make Money
We sustain our operations through affiliate commissions and advertising. If you click on an affiliate link and make a purchase, we may receive a commission from the merchant at no additional cost to you. We also display advertisements on our website, which help generate revenue to support our work and keep our content free for readers. Our editorial team operates independently of our advertising and affiliate partnerships to ensure that our content remains unbiased and focused on providing you with the best information and recommendations based on thorough research and honest evaluations. To remain transparent, we’ve provided a list of our current affiliate partners here.
Hardware

Our Promise to you

Founded in 2002, our company has been a trusted resource for readers seeking informative and engaging content. Our dedication to quality remains unwavering—and will never change. We follow a strict editorial policy, ensuring that our content is authored by highly qualified professionals and edited by subject matter experts. This guarantees that everything we publish is objective, accurate, and trustworthy.

Over the years, we've refined our approach to cover a wide range of topics, providing readers with reliable and practical advice to enhance their knowledge and skills. That's why millions of readers turn to us each year. Join us in celebrating the joy of learning, guided by standards you can trust.

What is a Transistor Drain?

By G.W. Poulos
Updated: May 16, 2024
Views: 25,349
Share

A transistor drain is part of a field effect transistor, commonly called a FET, and the equivalent of the emitter on a standard semiconductor transistor. A FET has four basic components and corresponding terminals called the gate, the source, the body, and the drain. When a control voltage exists at the FET’s gate and body, any electrical signal waiting at the source will travel from the source to the transistor drain and out of the drain’s terminal. Thus, a transistor drain can refer to either the output component of a field effect transistor or the terminal that connects the component to other circuitry.

While field effect transistors perform functions similar to standard junction type transistors, how they perform those functions is very different. A regular transistor is made of three pieces of material carrying an alternating static charge, either positive-negative-positive, called PNP, or negative-positive-negative, called NPN. These pieces, called the collector, emitter, and base, are fused together, which essentially creates a diode with either two anodes or two cathodes.

If an electrical signal is waiting at the transistor’s collector and there is no voltage at the base, the transistor is said to be switched off and does not conduct an electrical signal. Should voltage then enter the transistor’s base, it alters the electrical charge of the base. This change in charge switches the transistor on, and the collector signal conducts through the transistor and out of its emitter for use by other electronic circuitry.

Field effect transistors operate on an entirely different principle. A FET is comprised of four pieces of material, each with a terminal, called the source, gate, drain, and body. Of these four, only the source, drain, and body carry a static charge. Either this charge will be negative in the source and drain, called an n-channel FET, or it will be positive in both, called a p-channel FET. In either case, the body of FET will carry a charge opposite to the source and drain.

These four pieces are then assembled in an order that is also different from in standard transistors. The source and drain will be fused to either end of the body. The gate is then fused to the source and drain, bridging them but not coming into direct contact with the body of the transistor. Instead, the gate is set parallel to and at a specific distance from the body.

If the FET is an n-channel type device, either no voltage or a negative voltage connected between the source and the drain will switch the FET to an off state, and it will not conduct a signal between the source and drain. With the body of the FET charged, placing a positive voltage at the gate of the FET will switch it to an on state. The charge of the gate will begin to pull electrons from the body of the FET, essentially creating a field called the conductive channel.

If the voltage at the gate is strong enough, a point referred to as its threshold voltage, the conductive channel can fully form. Once the conductive channel forms fully, the voltage at the FET’s source will then be able to conduct its signal through the conductive channel to and out of the transistor drain. If the voltage at the gate is then lowered below its threshold, the field across the gate and body of the FET will instantly collapse, taking the conductive channel along with it and returning the FET to an off state.

FETs are very sensitive to their gate threshold voltages. Using a gate voltage that is only slightly higher than required, then lowering it only slightly, will switch the FET on and off very quickly. As a result, varying the gate voltage only slightly at a very high frequency can turn the FET off and on at much faster speeds, and with much smaller voltages, than possible with a standard transistor. The speeds at which FETs can switch make them the ideal transistors for high-speed digital circuits. They find extensive use in devices such as digital integrated circuits and microprocessors, and they are the transistor of choice for use in modern computer CPUs.

Share
EasyTechJunkie is dedicated to providing accurate and trustworthy information. We carefully select reputable sources and employ a rigorous fact-checking process to maintain the highest standards. To learn more about our commitment to accuracy, read our editorial process.
Discussion Comments
By LearningNow — On Jun 05, 2014

Thanks for the post! I had a pile of n-channel JFETs lying around and wasn't sure how they worked. This has helped clear up the fog.

Share
https://www.easytechjunkie.com/what-is-a-transistor-drain.htm
Copy this link
EasyTechJunkie, in your inbox

Our latest articles, guides, and more, delivered daily.

EasyTechJunkie, in your inbox

Our latest articles, guides, and more, delivered daily.